Pistol version
The pistol series screwdrivers feature a characteristic pistol-type design, low weight and the ability to achieve
torques from 0.4 to even 12 Nm. They are equipped with precise shut-off clutches - when the set torque is
reached, the air supply is cut off and the screwdriver mechanism stops immediately, such a solution eliminates
any doubts the operator has about achieving the set torque.
The torque value is adjusted on the torque tool tester using a special tool, supplied with each screwdriver -
thanks to this, the operator cannot accidentally change it or make unauthorized adjustments.
The characteristic pistol design allows for achieving high torque values, even up to 12 Nm, without the need to
use additional reaction arms!
Pistol series screwdrivers are dedicated to industrial use, they work perfectly in the most difficult conditions of
use with high frequency work, made of the highest quality materials, provide comfort of use combined with
high precision and reliability.
The most important advantages of Pistol series screwdrivers:
- Ability to reach up to 12 Nm without a reaction arm
- Precise shut-off clutch
- Protection against accidental or unauthorized change of torque value
- Dedicated to industrial use in a continuous production process
- High quality, made of the highest class materials
| Model | Torque(Nm) | Speed(rpm) | Weight(Kg) | A | B | C |
| DSEL PA35G1400 | 0,4 - 3,5 | 1400 | 0,72 | 37,3 | 179,3 | 161,2 |
| DSEL PA45G950 | 0,4 - 4,5 | 950 | 0,72 | 37,3 | 179,3 | 161,2 |
| DSEL PA50G650 | 0,4 - 5 | 650 | 0,72 | 37,3 | 179,3 | 161,2 |
| DSEI PA40G2000 | 0,4 - 4 | 2000 | 1,00 | 43,8 | 196 | 165,3 |
| DSEI PA50G1300 | 0,4 - 5 | 1300 | 1,00 | 43,8 | 196 | 165,3 |
| DSEI PA80G1000 | 3,5 - 8 | 1000 | 1,10 | 43,8 | 215,8 | 165,3 |
| DSEI PA95G800 | 3,5 - 9,5 | 800 | 1,10 | 43,8 | 215,8 | 165,3 |
| DSEI PA120G400 | 3,5 - 12 | 400 | 1,10 | 43,8 | 215,8 | 165,3 |
Push to start
The "Push to start" series screwdrivers straight type with and push to start mechanism, with low weight and the
ability to achieve torques from 0.4 to even 12 Nm. They are equipped with precise shut-off clutches - when the
set torque is reached, the air supply is cut off and the screwdriver mechanism stops immediately, such a
solution eliminates any doubts the operator has about achieving the set torque.
To start the tool it's enough to put bit in the head of the bolt and push the tool down verticaly.
The torque value is adjusted on the torque tool tester using a special tool, supplied with each screwdriver -
thanks to this, the operator cannot accidentally change it or make unauthorized adjustments.
The characteristic design allows for achieving high torque values, even up to 12 Nm and ensures easy
installation in specially dedicated reaction arms - required by health and safety regulations for pneumatic tools
with a torque above 5 Nm
"Push to start" series screwdrivers are dedicated to industrial use, they work perfectly in the most difficult conditions of
use with high frequency work, made of the highest quality materials, provide comfort of use combined with
high precision and reliability.
The most important advantages of "Push to Start" series screwdrivers:
- Featured with Push to Start mechanism
- Ability to reach up to 12 Nm without a reaction arm
- Precise shut-off clutch
- Protection against accidental or unauthorized change of torque value
- Dedicated to industrial use in a continuous production process
- High quality, made of the highest class materials
| Model | Torque(Nm) | Speed(rpm) | Weight(Kg) | A | B | C | D | E |
| DSEL A35P1400 | 0,4 - 3,5 | 1400 | 0,59 | 51,4 | 229,2 | 49 | - | - |
| DSEL A45P950 | 0,4 - 4,5 | 950 | 0,59 | 51,4 | 229,2 | 49 | - | - |
| DSEL A50P650 | 0,4 - 5 | 650 | 0,59 | 51,4 | 229,2 | 49 | - | - |
| DSEI A40P2000 | 0,4 - 4 | 2000 | 0,80 | 55,2 | 251,3 | 49,6 | - | - |
| DSEI A50P1350 | 0,4 - 5 | 1350 | 0,80 | 55,2 | 251,3 | 49,6 | - | - |
| DSEI A80P1000 | 3,5 - 8 | 1000 | 0,90 | 54,8 | 272,2 | 48,9 | - | - |
| DSEI A95P850 | 3,5 - 9,5 | 850 | 0,90 | 54,8 | 272,2 | 48,9 | - | - |
| DSEI A120P400 | 3,5 - 12 | 400 | 0,90 | 54,8 | 272,2 | 48,9 | - | - |
Lever start mechanism
The "Lever Start" series screwdrivers straight type with and lever start mechanism, with low weight and the ability
to achieve torques from 0.4 to even 12 Nm. They are equipped with precise shut-off clutches - when the set
torque is reached, the air supply is cut off and the screwdriver mechanism stops immediately, such a solution
eliminates any doubts the operator has about achieving the set torque.
The torque value is adjusted on the torque tool tester using a special tool, supplied with each screwdriver -
thanks to this, the operator cannot accidentally change it or make unauthorized adjustments.
The characteristic design allows for achieving high torque values, even up to 12 Nm and ensures easy
installation in specially dedicated reaction arms - required by health and safety regulations for pneumatic tools
with a torque above 5 Nm
"Lever Start" series screwdrivers are dedicated to industrial use, they work perfectly in the most difficult conditions of
use with high frequency work, made of the highest quality materials, provide comfort of use combined with
high precision and reliability.
The most important advantages of "Lever Start" series screwdrivers:
Featured with Lever Start mechanism
- Ability to reach up to 12 Nm without a reaction arm
- Precise shut-off clutch
- Protection against accidental or unauthorized change of torque value
- Dedicated to industrial use in a continuous production process
- High quality, made of the highest class material
| Model | Torque(Nm) | Speed(rpm) | Weight(Kg) | A | B | C | D | E |
| DSEL A35L1400 | 0,4 - 3,5 | 1400 | 0,60 | 51,4 | 228,3 | 49 | 70,5 | 62 |
| DSEL A45L950 | 0,4 - 4,5 | 950 | 0,60 | 51,4 | 228,3 | 49 | 70,5 | 62 |
| DSEL A50L650 | 0,4 - 5 | 650 | 0,60 | 51,4 | 228,3 | 49 | 70,5 | 62 |
| DSEI A40L2000 | 0,4 - 4 | 2000 | 0,85 | 50,5 | 251,3 | 49,6 | 110 | 77,5 |
| DSEI A50L1350 | 0,4 - 5 | 1350 | 0,85 | 50,5 | 251,3 | 49,6 | 110 | 77,5 |
| DSEI A80L1000 | 3,5 - 8 | 1000 | 0,93 | 50,3 | 272,2 | 48,9 | 110 | 77,5 |
| DSEI A95L850 | 3,5 - 9,5 | 850 | 0,93 | 50,3 | 272,2 | 48,9 | 110 | 77,5 |
| DSEI A120L400 | 3,5 - 12 | 400 | 0,93 | 50,3 | 272,2 | 48,9 | 110 | 77,5 |
Angular series
The series screwdrivers angle type with square drive and lever start mechanism, with low weight and the ability to achieve torques from 0.8 to even 5 Nm. They are equipped with precise shut-off clutches - when the set torque is reached, the air supply is cut off and the screwdriver mechanism stops immediately, such a solution eliminates any doubts the operator has about achieving the set torque.
The torque value is adjusted on the torque tool tester using a special tool, supplied with each screwdriver -
thanks to this, the operator cannot accidentally change it or make unauthorized adjustments.
The angled design provides access to confined and hard-to-reach places, while the square drive
allows for use with all standard sockets available on the market
Angle series screwdrivers are dedicated to industrial use, they work perfectly in the most difficult conditions of
use with high frequency work, made of the highest quality materials, provide comfort of use combined with
high precision and reliability.
The most important advantages of Angular series screwdrivers:
- Angle type tools
- Featured with Lever Start mechanism
- Ability to reach up to 12 Nm without a reaction arm
- Precise shut-off clutch
- Square drive allows to use all market available sockets
- Protection against accidental or unauthorized change of torque value
- Dedicated to industrial use in a continuous production process
- High quality, made of the highest class materials
